Recording media:SDHC card (4GB to 32GB), SDXC card(48GB to 128GB) High speed cards required.
Recording format
WAV:44.1k/48k/96k Hz, 16/24-bit
BWF:44.1k/48k/96k Hz, 16/24-bit
Number of channels:4-channel (stereo × 2, mono × 4)
Analog audio input
1/L, 2/R, 3/L, 4/R connectors
Connector:XLR-3-31 (1:GND, 2:HOT, 3:COLD) / 1/4" (6.3mm)TRS standard jack
Set to "MIC / MIC+PHANTOM"
Input impedance:2k ohms
Phantom power:48V ±4V (10mA/CH), 24V ±4V (10mA/CH)
Maximum input level:0dBu
Minimum input level:–72dBu
MIC input gain:TRIM MAX
LOW:+21dB
MID:+36dB
HIGH:+51dB
HI + PLUS:+63dB
Set to "LINE"
Input impedance:10k ohms or more
Standard input level:+4dBu
Maximum input level:+20dBu
1/2 connector
Connector:1/8" (3.5mm) stereo mini jack (this connector can be supplied plug-in power)
Input impedance:10k ohms
Maximum input level:+10dBV
Minimum input level:–50dBV
MIC input gain:TRIM MAX
LOW +3dB
MID +11dB
HIGH +26dB
HI + PLUS +38dB
CAMERA IN connector
Connector:1/8" (3.5mm) stereo mini jack
Input impedance:10k ohms
Standard input level:–10dBV
Maximum input level:+6dBV
Analog audio output
LINE OUT connector
Connector:(1/8" (3.5mm) stereo mini jack
Output impedance :200 ohms
Standard output level:–10dBV
Maximum output level:+6dBV
CAMERA OUT connector
Connector:1/8" (3.5mm) stereo mini jack
Output impedance :200 ohms
Standard output level:–40dBV
Maximum output level:–24dBV
PHONES connector
Connector:1/8" (3.5mm) stereo mini jack
Maximum output level:20mW + 20mW
USB
Connector:Micro-B type
Format:USB2.0 HIGH SPEED mass storage class
REMOTE
Connector:2.5mm TRS jack
Power:4 AA batteries(Alkaline or NI-MH),
USB bus power,
Dedicated AC adapter (TASCAM PS-P515U, sold separately),
Dedicated external battery pack (TASCAM BP-6AA, sold separately)
Power consumption:5.0W
Continuous operation time:2ch WAV, 44.1kHz, 16-bit Rec, Phantom power not used. *All times are approximate.
Operating temperature 32˚F to 104˚F / 0˚C to 40˚C
Standard accessories USB cable, Camera attachment bracket screw hole covers × 6 Owner's Manual (including warranty)